Medium Voltage Metal-Clad Switchgear / MCSG is designed for safe and reliable power distribution in utility, industrial, commercial, and infrastructure projects. With a withdrawable VCB, compartmentalized metal-clad structure, insulated busbar system, mechanical interlocks, and optional arc-resistant design, it provides stable operation for medium-voltage power systems.
| Rated Voltage Range | 5kV–38kV, customizable according to project requirements |
|---|---|
| Typical Voltage Classes | 5kV, 15kV, 27kV, 38kV |
| Main Breaker Type | Withdrawable Vacuum Circuit Breaker, VCB |
| Corrente nominal | Project-based configuration; options can be selected according to system design |
| Short-Circuit Rating | Project-based configuration; available designs can support high short-circuit withstand requirements |
| Standards | IEEE C37.20.2, IEEE C37.20.7, ANSI / UL project requirements, IEC 62271-200 reference |
Apenas configuração típica. As potências nominais finais são confirmadas de acordo com os requisitos do projeto.
Medium Voltage Metal-Clad Switchgear is used in medium-voltage power distribution systems where safe power control, reliable protection, and stable operation are required. It can be used as incoming switchgear, feeder switchgear, transformer protection switchgear, bus section switchgear, or motor feeder switchgear depending on the electrical system design.
1. Applicable Scope and Purpose of Circuit Breaker The NDM2-630 molded case circuit breaker (hereinafter referred to as circuit breaker) applies to infrequent switching of circuits with the AC 50/60Hz, the working voltage of AC690V and working c...
Ver detalhes
1.Application Scope NDB1-40 dedicated to the low voltage power distribution system of industrial, buildings, energy, communications and infrastructure. The MCB can cut off phase and neutral lines at the same time, whereas the neutral line should...
Ver detalhes
1. Applicable Scope and Purpose of Circuit Breaker The NDM2E-630 series of electronic molded case circuit breakers (hereinafter referred to as circuit breakers) apply to infrequent switching of circuits with the AC 50Hz, the working voltage of A...
Ver detalhes
O transformador trifásico imerso em óleo da Série I ZGS, montado em pedestal, é um transformador de distribuição trifásico montado no solo, concebido para sistemas de distribuição de energia de média tensão. É utilizado principalmente para reduzir a tensão de média tensão proveniente da rede elétrica...
Ver detalhes
Categorias em destaque
Enviar um pedido de informação sobre o produto
Entraremos em contacto consigo no prazo de 24 horas